MASTERS PHYSICS PROJECT TOPICS AND MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT, TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953, 08168759420

WE WILL THEN SEND THE ABSTRACT, TABLE OF CONTENT AND CHAPTER ONE FOR FREE

NOTE ALSO:

WE CAN ALSO DEVELOP THE FULL PROJECT WORK

CALL: 08068231953, 08168759420

MASTERS PHYSICS PROJECT TOPICS AND MATERIALS

  • DESIGN AND CONSTRUCTION OF A PYRAMID-SHAPED SOLAR
  • THE DETERMINETION OF THE RELATIONSHIP BETWEEN THE WEIGHT AND AGE OF MALE AND FEMALE STUDENTS IN DELTA STATE UNIVERSITY, ABRAKA
  • THE DESIGN, CONSTRUCTION AND TEST ON A TWO STATION SIMPLE INTERCOM SYSTEM
  • A GEOPHYSICAL INVESTIGATION USING SEISMIC REFRACTION METHOD TO DETERMINE THE CAUSES OF ROAD FAILURE, A CASE STUDY OF IRUEKPEN-OZALLA ROAD AXIS
  • A STUDY INTO ENERGY GAP IN SUPER CONDUCTORS
  • THE DETERMINETION OF THE RELATIONSHIP BETWEEN THE WEIGHT AND AGE OF MALE AND FEMALE STUDENTS IN DELTA STATE UNIVERSITY, ABRAKA
  • THE DESIGN, CONSTRUCTION AND TEST ON A TWO STATION SIMPLE INTERCOM SYSTEM
  • A GEOPHYSICAL INVESTIGATION USING SEISMIC REFRACTION METHOD TO DETERMINE THE CAUSES OF ROAD FAILURE, A CASE STUDY OF IRUEKPEN-OZALLA ROAD AXIS
  • A STUDY INTO ENERGY GAP IN SUPER CONDUCTORS
  • DESIGN AND CONSTRUCTION OF A PYRAMID-SHAPED SOLAR
  • THE DETERMINETION OF THE RELATIONSHIP BETWEEN THE WEIGHT AND AGE OF MALE AND FEMALE STUDENTS IN DELTA STATE UNIVERSITY, ABRAKA
  • THE DESIGN, CONSTRUCTION AND TEST ON A TWO STATION SIMPLE INTERCOM SYSTEM
  • A GEOPHYSICAL INVESTIGATION USING SEISMIC REFRACTION METHOD TO DETERMINE THE CAUSES OF ROAD FAILURE, A CASE STUDY OF IRUEKPEN-OZALLA ROAD AXIS
  • A STUDY INTO ENERGY GAP IN SUPER CONDUCTORS
  • DESIGN AND CONSTRUCTION OF A MONITORING SYSTEM THAT MEASUREE LIGHT INTENSITY AND GAS LEVEL
  • DESIGN AND CONSTRUCTION OF OCEAN SURFACE AND SUBSURFACE CURRENT SIMULATOR
  • DESIGN AND IMPLEMENTATION OF A QUERY OPTIMIZER
  • RADIOACTIVITY CONCENTRATION OF SOME STAPLE FOOD CONSUMED IN UVWIE AND WARRI SOUTH LOCAL GOVERNMENT AND EFFECT ON HUMAN AFTER CONSUMPTION
  • A COMPARATIVE ENTHALPY APPROACH FOR CO- AND COUNTERCURRENT FLOW IN CONCENTRIC TUBE HEAT EXCHANGER
  • OPTICAL AND STRUCTURAL PROPERTIES OF COPPER ALUMINUM DISELENIDE (CuAlSe2) COMPOUND THIN FILMS
  • THE PHYSICS OF STARS AND THEIR ASTRONOMICAL IDENTIFICATION
  • THE PHENOMENOLOGY OF JETS IN ASTROPHYSICS
  • DESIGN,IMPLEMENTATION AND SIMULATION OF PREPAID METER, THEFT MONITORING SYSTEM W…
  • CONSTRUCTION OF AN AC TRANSFORMER 220 V – 110 V
  • CONSTRUCTION OF AN ELECTRONIC BELL INDICATOR
  • DESIGN AND CONSTRUCTION OF A 6 VOLT LEAD AGD ACCUMULATOR
  • DESIGN AND CONSTRUCTION OF A BATTERY CHARGER
  • DESIGN AND CONSTRUCTION OF A LOW VOLTAGE (± 15 VOLTS) POWER SUPPLY UNIT
  • DESIGN AND CONSTRUCTION OF AUTOMATIC GENERATOR STARTING SWITCH
  • DESIGN AND CONSTRUCTION OF AUTOMATIC POLYTHENE SEALING AND CUTTING MACHINE
  • REPAIR AND MAINTENANCE OF MICROSCOPES IN SCIENCE LABORATORY DEPARTMENT IN INSTITUTE OF MANAGEMENT AND TECHNOLOGY (I.M.T) ENUGU
  • ANALYSIS OF SCINTILLATOR CHARACTERISTICS FOR DETECTION OF ILLICIT RADIOACTIVE SOURCES
  • STUDY ON THE EFFECT OF SOLAR POWER
  • The design, construction and test on a two station simple intercom system
  • PROCESS FLOW DESIGN OF THE THERMOCHEMICAL CONVERSION OF FOOD WASTE IN GASIFIER
  • ASSEMBLY PLANT DETERMINATION OF ALPHA PARTICLE RANGE IN DIFFERENT NOBLE GASES USING SRIM SOFTWARE
  • MEASUREMENT OF AND EFFECT OF ENVIRONMENTAL NOISE IN THE MARKET
  • CONSTRUCTION AND APPLICATION OF HEAT SENSOR
  • DESIGN AND SIMULATION OF AUTOMATIC SOLAR POWERED TIME REGULATED WATER PUMPING AND IRRIGATION SYSTEM
  • SOLAR POWER INVERTERS, ANALYSIS AND TEST EVALUATION
  • SOLAR TECHNOLOGY: AN ALTERNATIVE SOURCE OF ENERGY FOR NATIONAL DEVELOPMENT
  • IMPROVING THE CAPACITY OF A RENEWABLE POWER SYSTEM, USING SOLAR POWER PANEL (A CASE STUDY OF COMPUTER SCIENCE ND SOFTWARE LAB)
  • EXPERIMENTAL HYDRODYNAMIC ON REAL CIRCULATING FLUIDINIZED BED (CFB) RISER USING A DEVELOPED DC MOTOR
  • DESIGN AND CONSTRUCTION OF 4-CHANNEL AUDIO MIXER
  • DESIGN AND CONSTRUCTION OF AUDIO MEGAPHONE
  • DESIGN AND CONSTRUCTION OF SCR TESTER
  • DESIGN AND CONSTRUCTION OF GUITAR HEADPHONE AMPLIFIER
  • DESIGN AND CONSTRUCTION OF GUITAR AMP
  • DESIGN AND CONSTRUCTION OF OP-AMP BOOSTER DESIGN
  • DESIGN AND CONSTRUCTION OF 5-CHANNEL EQUALIZER
  • DESIGN AND CONSTRUCTION OF 2-WAY WIRED INTERCOM
  • DESIGN AND CONSTRUCTION OF SOLAR POWER AUTO STREET LIGHT
  • DESIGN AND CONSTRUCTION OF NUMERIC CONTROLLED DOOR LOCKING SYSTEM
  • DESIGN AND CONSTRUCTION OF AUTOMATIC BELL RINGER
  • DESIGN AND CONSTRUCTION OF PORTABLE FM TRANSMITTER
  • DESIGN AND CONSTRUCTION OF REMOTE CONTROL FAN
  • DESIGN AND CONSTRUCTION OF 500W AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF REMOTE CONTROL AC LAMP
  • DESIGN AND CONSTRUCTION OF SENSOR OPERATED AUTOMATIC DOOR OPEN/CLOSE MACHINE
  • DESIGN AND CONSTRUCTION OF PUBLIC ADDRESSING SYSTEM
  • DESIGN AND CONSTRUCTION OF UNDER AND OVER VOLTAGE POWER PROTECTION SYSTEM
  • DESIGN AND CONSTRUCTION OF REMOTE CONTROL GATE
  • DESIGN AND CONSTRUCTION OF GENERATION OF CONSTANT POWER SUPPLY USING DC SOURCE
  • DESIGN AND CONSTRUCTION OF 5KVA MODIFIED SINE WAVE CONVERTER
  • DESIGN AND CONSTRUCTION OF SOUND ACTIVATED DEVICE
  • DESIGN AND CONSTRUCTION OF AUTOMATIC OVEN CONTROLLER
  • DESIGN AND CONSTRUCTION OF 200W BASS GUITAR POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF TEMPERATURE CONTROL INCUBATOR
  • DESIGN AND CONSTRUCTION OFAUTO WATER LEVEL CONTROLLER
  • DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM WITH AUTO GENERATOR STARTING DEVICE
  • DESIGN AND CONSTRUCTION OF UPS
  • DESIGN AND CONSTRUCTION OF 60W POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF AUDIO ISOLATION TRANSFORMER
  • DESIGN AND CONSTRUCTION OF FET AMPLIFIER
  • DESIGN AND CONSTRUCTION OF STEREO POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF HOME AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF 100W AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF SUBWOOFER AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF SECURITY BEEPER
  • DESIGN AND CONSTRUCTION OF 180W AMPLIFIER
  • DESIGN AND CONSTRUCTION OF 45W POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF SINGLE CHIP 60W AMPLIFIER
  • DESIGN AND CONSTRUCTION OF 600W AMPLIFYING CIRCUIT
  • DESIGN AND CONSTRUCTION OF HOME THEATRE AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF HIGH QUALITY 150W POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF MINI MICROPHONE CIRCUIT
  • DESIGN AND CONSTRUCTION OF 300W HI-FI AMPLIFIER
  • DESIGN AND CONSTRUCTION OF AUDIO PREAMPLIFIER WITH TONE CONTROL
  • DESIGN AND CONSTRUCTION OF 200W STEREO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF BASS POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF TRANSISTOR POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF HEADPHONE AMPLIFIER
  • DESIGN AND CONSTRUCTION OF SWEEPING TONE ALARM BEEPER
  • DESIGN AND CONSTRUCTION OF 3-CHANEL MICROPHONE MIXER
  • DESIGN AND CONSTRUCTION OF POLICE SIREN
  • DESIGN AND CONSTRUCTION OF 3-BAND DUAL GRAPHIC EQUALIZER
  • DESIGN AND CONSTRUCTION OF AUDIO POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF 10-INPUT MIXER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF EQUALIZER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF TAPE-RADIO-MIC AUDIO INPUT AMPLIFIER
  • DESIGN AND CONSTRUCTION OF TONE CONTROL CIRCUIT
  • EFFECT OF WESTERN TV PROGRAM ON NIGERIAN YOUTHS
  • EFFECTS OF TEMPERATURE ON VISCOSITY OF WATER,MILK AND CORN OIL
  • DESIGN AND CONSTRUCTION OF TEMPERATURE CONTROL CIRCUITS
  • DESIGN AND CONSTRUCTION OFALTERNATING ON-OFF SWITCH
  • DESIGN AND CONSTRUCTION OF AC VOLTAGE REGULATOR/STABILIZER
  • DESIGN AND CONSTRUCTION OF UPS POWER SUPPLY
  • DESIGN AND CONSTRUCTION OF VARIABLE POWER SUPPLY
  • DESIGN AND CONSTRUCTION OF DUAL POWER SUPPLY
  • DESIGN AND CONSTRUCTION OF AUDIO POWER INDICATOR
  • DESIGN AND CONSTRUCTION OF AMPLIFIER INPUT MODULE
  • DESIGN AND CONSTRUCTION OF TRANSFORMER-LESS POWER SUPPLY
  • DESIGN AND CONSTRUCTION OF INTRUDER ALARM
  • DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM
  • DESIGN AND CONSTRUCTION OF REMOTE CONTROL AC LAMP
  • DESIGN AND CONSTRUCTION OF CAR DEMOBILIZING SYSTEM
  • DESIGN AND CONSTRUCTION OF CAR ANTI-THEFT DEVICE
  • DESIGN AND CONSTRUCTION OF MINIATURE FM TRANSMITTER
  • DESIGN AND CONSTRUCTION OF AUTO INTRUDER ALARM
  • DESIGN AND CONSTRUCTION OF POWER SUPPLIES
  • DESIGN AND CONSTRUCTION OF AUTOMATIC BATTERY CHARGERS
  • DESIGN AND CONSTRUCTION OF WAILING ALARM
  • DESIGN AND CONSTRUCTION OF RAIN ACTIVATED ALARM
  • DESIGN AND CONSTRUCTION OF BEEPER
  • DESIGN AND CONSTRUCTION OF TV, AM, FM ANTENNA BOOSTER
  • DESIGN AND CONSTRUCTION OF WATER LEVEL CONTROLLER
  • DESIGN AND CONSTRUCTION OF FUEL/WATER LEVEL INDICATOR
  • DESIGN AND CONSTRUCTION OF AUTO TURN-OFF BATTERY CHARGER
  • DESIGN AND CONSTRUCTION OF DARK/LIGHT ACTIVATED ALARM
  • DESIGN AND CONSTRUCTION OF POWER AND AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF 10-INPUT MICROPHONE MIXER
  • DESIGN AND CONSTRUCTION OF TRANSISTOR ORGAN
  • DESIGN AND CONSTRUCTION OF 50/80W AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF HEADPHONE AMPLIFIER
  • DESIGN AND CONSTRUCTION OF SOLAR PANEL
  • DESIGN AND CONSTRUCTION OF SOLAR WATER HEATER
  • DESIGN AND CONSTRUCTION OF NO POLLUTION POWER GENERATOR
  • DESIGN AND CONSTRUCTION OF SOUND OR CLAP ACTIVATED ALARM
  • WATER-DRY INDICATOR WIND ENERGY GENERATOR
  • DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM
  • DESIGN AND CONSTRUCTION OF AN ALTERNATING ON-OFF SWITCH
  • DESIGN AND CONSTRUCTION OF AN AC VOLTAGEREGULATOR/STABILIZER
  • DESIGN AND CONSTRUCTION OF AN UPS POWER SUPPLY
  • DESIGN AND CONSTRUCTION OFVARIABLE POWER SUPPLY
  • DESIGN AND CONSTRUCTION OF DUAL POWER SUPPLY
  • DESIGN AND CONSTRUCTION OFAUDIO POWER INDICATOR
  • DESIGN AND CONSTRUCTION OFAMPLIFIER INPUT MODULE
  • DESIGN AND CONSTRUCTION OFTRANSFORMER-LESS POWER SUPPLY
  • DESIGN AND CONSTRUCTION OF INTRUDER ALARM
  • DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM
  • DESIGN AND CONSTRUCTION OF REMOTE CONTROL AC LAMP
  • DESIGN AND CONSTRUCTION OFCAR DEMOBILIZING SYSTEM
  • DESIGN AND CONSTRUCTION OF CAR ANTI-THEFT DEVICE
  • DESIGN AND CONSTRUCTION OF MINIATURE FM TRANSMITTER
  • DESIGN AND CONSTRUCTION OF AUTO INTRUDER ALARM
  • DESIGN AND CONSTRUCTION OF POWER SUPPLIES
  • DESIGN AND CONSTRUCTION OFAUTOMATIC BATTERY CHARGERS
  • DESIGN AND CONSTRUCTION OFCONSTRUCTION OFWAILING ALARM
  • DESIGN AND CONSTRUCTION OFRAIN ACTIVATED ALARM
  • DESIGN AND CONSTRUCTION OF BEEPER
  • DESIGN AND CONSTRUCTION OF TV, AM, FM ANTENNA BOOSTER
  • DESIGN AND CONSTRUCTION OF WATER LEVEL CONTROLLER
  • DESIGN AND CONSTRUCTION OFFUEL/WATER LEVEL INDICATOR
  • DESIGN AND CONSTRUCTION OFAUTO TURN-OFF BATTERY CHARGER
  • DESIGN AND CONSTRUCTION OFDARK/LIGHT ACTIVATED ALARM
  • DESIGN AND CONSTRUCTION OFPOWER AND AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF10-INPUT MICROPHONE MIXER
  • DESIGN AND CONSTRUCTION OFTRANSISTOR ORGAN
  • DESIGN AND CONSTRUCTION OF50/80W AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF HEADPHONE AMPLIFIER
  • DESIGN AND CONSTRUCTION OF SOLAR PANEL
  • • DESIGN AND CONSTRUCTION OF SOLAR WATER HEATER
  • DESIGN AND CONSTRUCTION OF NO POLLUTION POWER GENERATOR
  • DESIGN AND CONSTRUCTION OF SOUND OR CLAP ACTIVATED ALARM
  • WATER-DRY INDICATOR
  • WIND ENERGY GENERATOR
  • DESIGN AND CONSTRUCTION OFPOWER FAILURE ALARM
  • SOLAR PRINCIPLE AND DESIGN OF SOLAR PANEL
  • DESIGN AND CONSTRUCTION OF ASTABLE MULTIVIRATOR
  • DESIGN AND CONSTRUCTION OF SOLAR WATER HEATER
  • DESIGN AND CONSTRUCTION OF 2000W INVERTER SYSTEM
  • DESIGN AND CONSTRUCTION OF A D.C TO A.C INVETER SYSTEM
  • THE CONSTRUCTION OF A 3-PHASE MOTOR OPERATION INDICATOR
  • CONSTRUCTION OF PVS CONDUIT WIRING SYSTEM OF TWO BEDROOM BUNGALOW
  • DESIGN AND CONSTRUCTION OF A 12 VOLT BATTERY CHARGER
  • CONSTRUCTION OF AUTOMATIC CHANGE OVER WITH GENERATOR TRIP OFF
  • DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER
  • THE DESIGN AND CONSTRUCTION OF MINI RADIO BROADCAST TRANSMITTER AND AUDIO CONSOLE USING FREQUENCY
  • MODULATION (FM) WITH POWER RATING OF 1 WATT
  • DESIGN AND CONTRUCTION OF AN 500W TRANSISTOR AMPLIFIER
  • THE DESIGN AND CONSTRUCTION OF A 40 WATT HI-FI AMPLIFIER
  • DESIGN AND CONSTRUCTION OF A 3 WAY INTER-COMMUNICATION SYSTEM
  • THE DESIGN AND CONSTRUCTION OF CAR CONTROLLER USING TELEMETRY SYSTEM
  • DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGE OVER SWITCH WITH PHASE SELECTOR
  • THE DESIGN AND CONSTRUCTION OF AN INVERTER
  • THE DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR
  • DESIGN AND CONSTRUCTION OF A TWO LANE TRAFFIC LIGHT
  • THE DESIGN AND IMPLEMENTATION OF A FOUR – WAY TRAFFIC LIGHT CONTROL CIRCUIT.
  • DESIGN AND CONSTRUCTION OF A MULTIPERPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY
  • CONSTRUCTION OF 200W UNINTERRUPTIBLE POWER SUPPLY
  • THE DESIGN AND CONSTRUCTION OF AN UNINTERRUPTED POWER SYSTEM (UPS)
  • • THE DESIGN OF A 500WATTS UNINTERRUPTIBLE POWER SUPPLY WITH VOLTAGE LEO INDICATOR [INVERTER]
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC PHASE SELECTOR
  • DESIGN AND CONSTRUCTION OF POWER AMPLIFIER
  • THE DESIGN AND CONSTRUCTION OF ELECTRIC ARC WELDING MACHINE
  • DESIGN AND CONSTRUCTION OF UNINTERRUPTIBLE POWER SUPPLY
  • DESIGN AND CONSTRUCTION OF AN AUDIO AMPLIFIER
  • THE DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH AN AUTOMATIC SWITCH OVER
  • BATTERY CHARGER
  • DESIGN AND CONSTRUCTION OF VOLTAGE INVERTER SYSTEM WITH TRICKLE CHARGING SYSTEM
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC VOLTAGE STABILIZER
  • CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH (3.7KVA)
  • DESIGN AND CONSTRUCTION OF SOUND DETECTOR WITH ALARM SYSTEM
  • DESIGN AND CONSTRUCTION OF 25AMPS SINGLE PHASE AUTOMATIC CHANGE OVER
  • DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR
  • CONSTRUCTION OF AN INTRUDER ALARM SYSTEM
  • THE DESIGN AND IMPLEMENTATION OF ELECTRONICS SEQUENTIAL SIGN PATTER DISPLAY
  • THE DESIGN AND COSNTRUCTION OF 1000KWA STABILIZER
  • DESIGN AND CONSTRUCTION OF 12VOLTS CAR BATTERY AUTOMATIC CHARGER WITH VOLTAGE LEVEL INDICATOR AND
  • CHARGING PROCESS DISPLAY
  • DESIGN AND CONSTRUCTION OF 45W AUDIO POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF FIRE ALARM SYSTEM IN A TWO STOREYED BUILDING
  • DESIGN AND CONSTRUCTION OF A 60 WATTS POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING 1KVA, 240V/110, 80 12V, 6V
  • DESIGN AND CONSTRUCTION OF TEMPERATURE CONTROL OVEN
  • SERVOMOTOR MAGNETIC RESONANCE IMAGING (MRI)
  • DESIGN AND CONSTRUCTION REMOTE GATE CONTROL
  • DESIGN AND CONSTRUCTION OF 2.5 KVA VOLTAGE STABILIZER
  • DESIGN AND CONSTRUCTION OF WATER LEVEL SENSOR
  • DESIGN AND CONSTRUCTION OF COMPUTER NETWORK TESTER
  • ASSESSMENT OF POWER SYSTEM RELIABILITY
  • DESIGN AND CONSTRUCTION OF A WIRELESS DC MOTOR SPEED CONTROLLER
  • DESIGN AND CONSTRUCTION OF REMOTE CONTROL GATE
  • ENCRYPTION AND DECRYPTION
  • DESIGN AND CONSTRUCTION OF A MINI MICROPHONE
  • DESIGN AND CONSTRUCTION OF AN INTRUDER ALARM SYSTEM (2)
  • DESIGN AND CONSTRUCTION OF 2KVA MODIFIED SINEWAVE INVERTER
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC FENCE LIGHT SYSTEM
  • DESIGN AND CONSTRUCTION OF A HEADPHONE AMPLIFIER
  • A DYNAMIC MODEL OF AN EARTH FAULT RELAY FOR ONE PHASE POWER SYSTEM
  • DESIGN AND CONSTRUCTION A THREE PHASE AUTOMATIC VOLTAGE STABILIZER
  • DESIGN OF EXTERNAL LIGHTING USING CONVENTIONAL POWER SUPPLY
  • DESIGN AND CONSTRUCTION OF A VOICE OPERATED FIRE EXTINGUISHER VEHICLE
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATTERY CHARGER USING SCR
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATTERY CHARGER USING LM317
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATTERY CHARGER USING LM555.
  • DESIGN AND CONSTRUCTION OF A 2KVA AC VOLTAGE STABILISER
  • DESIGN AND CONSTRUCTION OF A 1.5KVA AUTOMATIC VOLTAGE STABILIZER
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC FENCE LIGHT SYSTEM
  • DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER
  • DESIGN AND CONSTRUCTION OF POWER FAILURE ALARM(2)
  • DESIGN AND CONSTRUCTION OF ALARM SYSTEM USING LIGHT DEPENDENT RESISTOR (LDR)
  • GLOBALISATION IN TEACHING AND LEARNING IN NIGERIA.
  • DESIGN AND CONSTRUCTION OF BRAKE LIGHT FLASHER
  • DESIGN AND CONSTRUCTION OF A SOLAR POWERED EMERGENGY LIGHTIGNG FOR A DOMESTIC BUILDING
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC PARKING LIGHT IN A CAR
  • APPLICATION OF FRONTAL DISPLACEMENT MECHANISM IN MICROBIAL ENHANCED OIL RECOVERY
  • THE USE OF MICROBES AS MOBILITY CONTROL AGENTS DURING MEOR
  • DESIGN AND CONSTRUCTION OF 5KVA DISTRIBUTION TRANSFORMER OF 240/110V, 24V,12V
  • DESIGN AND CONSTRUCTION OF A 6V AND 12 VOLTS AUTHOMATIC BATTERY CHARGER
  • FACTORS INFLUENCING TRUANCY AMONG STUDENTS IN SECONDARY SCHOOL
  • DESIGN AND CONSTRUCTION OF 2-WAY TRAFFIC LIGHT
  • DESIGN AND CONSTRUCTION OF 3-WAY TRAFFIC LIGHT
  • DESIGN AND CONSTRUCTION OF A 4-WAY TRAFFIC LIGHT
  • FACTORS AFFECTING THE MICROSCOPIC DISPLACEMENT EFFECIENCY IN ALKALINE FLOODS
  • DESIGN AND CONSTRUCTION OF WIRELESS LOAD CONTROLLER BY GSM
  • DESIGN AND CONSTRUCTION OF A 5KVA AUTOMATIC VOLTAGE STABILIZER
  • DESIGN AND CONSTRUCTION OF A 10KVA AUTOMATIC VOLTAGE STABILIZER
  • ASSEMBLING OF PENTIUM-4 COMPUTER
  • ASSEMBLING OF A COMPUTER SYSTEM
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC SWITCHING STREET LIGHT
  • DESIGN AND CONSTRUCTION OF A STREET LIGHT
  • DESIGN AND CONSTRUCTION OF A 3.5KVA MODIFIED SINE WAVE INVERTER
  • DESIGN AND CONSTRUCTION OF AN OPEN AND CLOSE DOOR SENSOR
  • DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH BATTERY CHARGER
  • DESIGN AND CONSTRUCTION OF AN INTELLIGENT EMERGENCY LIGHT SYSTEM
  • DESIGN AND CONSTRUCTION OF A D.C TO A.C INVERTER SYSTEM(2)
  • DESIGN AND CONSTRUCTION OF A 2KVA D.C TO A.C INVERTER SYSTEM
  • DESIGN AND CONSTRUCTION OF A 2.5KVA D.C TO A.C INVERTER SYSTEM
  • DESIGN AND CONSTRUCTION OF A 3.5KVA D.C TO A.C INVERTER SYSTEM
  • DESIGN AND CONSTRUCTION OF A 1KVA D.C TO A.C INVERTER SYSTEM
  • DESIGN AND CONSTRUCTION OF A PURE SINE WAVE INVERTER
  • DESIGN AND CONSTRUCTION OF A CAR CIGARETTE LIGHTER
  • DESIGN AND CONSTRUCTION OF AN INFRARED REMOTE CONTROLLED POWER SUPPLY-SWITCHING UNIT
  • DESIGN AND PLANNING OF BASE TRANSCIEVER STATION
  • DESIGN AND CONSTRUCTION OF A REMOTE CONTROLLED FAN REGULATOR
  • DESIGN AND CONSTRUCTION OF A FLOATING SWITCH
  • DESIGN AND CONSTRUCTION OF A SOLAR CELL PHONE CHARGER
  • DESIGN AND CONSTRUCTION OF A TOUCH ACTIVATED SWITCH
  • ASSEMBLING OF HIGH AND LOW VOLTAGE TRANSMISSION LINE ACCESSORIES
  • DESIGN AND CONSTRUCTION OF NUMERIC KEYPAD LOCK
  • DESIGN AND CONSTRUCTION OF A TEMPERATURE CONTROL INCUBATOR
  • CONSTRUCTION OF A TEMPERATURE CONTROL ELECTRIC KETTLE
  • DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER(2)
  • DESIGN AND CONSTRUCTION OF A SMOKE DETECTOR
  • DESIGN AND CONSTRUCTION OF A CAR IMMOBILIZING SYSTEM
  • DESIGN AND CONSTRUCTION OF A CAR DEMOBILIZING SYSTEM
  • DESIGN AND CONSTRUCTION OF A MOBILE INCOMING CALL INDICATOR
  • DESIGN AND CONSTRUCTION OF A VOLTMETER USING 8051
  • DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTOMATIC CHANGEOVER SWITCH WITH PHASE SELECTOR
  • DESIGN AND CONSTRUCTION OF PHASE CHANGER FOR THREE POWER SUPPLY
  • DESIGN & CONSTRUCTION OF 3-INPUT PUBLIC ADDRESSING SYSTEM
  • DESIGN AND CONSTRUCTION OF A SHADOW DETECTOR
  • INFRARED(IR) BASED SHADOW DETECTOR WITH AN ALARM
  • DESIGN AND CONSTRUCTION OF AN INFRARED AUDIO TRANSMITTER AND RECEIVER

DESIGN AND CONSTRUCTIONOF A

  • PASSIVE INFRARED (PIR) BASED AUTOMATIC DOOR SYSTEM
  • A SEMINAR TOPIC
  • ON SENSORS FOR HUMAN PRESENCE
  • DESIGN AND CONSTRUCTION OF A CLOSE CIRCUIT MONITOR
  • DESIGN AND CONSTRUCTION OF AN FM TRANSMITTER (3)
  • DESIGN AND CONSTRUCTION OF AN ELECTRONIC MOSQUITO REPELLENT CIRCUIT
  • DESIGN AND CONSTRUCTION OF TEMPERATURE SENSING ALARM SYSTEM
  • DESIGN AND CONSTRUCTION OF A  HOT WATER GEYSER CONTROLLER
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC DOOR BELL ALARM
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC TURN OFF SOLDERING IRON
  • DESIGN AND CONSTRUCTION OF A LUGGAGE SECURITY ALARM SYSTEM
  • DESIGN AND CONSTUCION A DC MOTOR CONTROL SYSTEM USING PULSE WIDTH MODULATION
  • DESIGN AND CONSTRUCTION OF SOLAR INVERTER
  • HND/B.SC ELECTRICAL/ELECTRONICS FREE PROJECT TOPICS
  • DESIGN AND CONSTRUCTION OF A PROXIMITY DETECTOR
  • DESIGN AND CONSRUCTION OF A POWER FAILURE ALARM WITH AUTO GENERATOR GENERATOR STARTING DEVICE
  • DESIGN AND CONSTRUCTION OF A WATER LEVEL CONTROLLER USING MICROCONTROLLER
  • DESIGN AND CONSTRUCTION OF A THYRISTOR CONTROLLED AUTOMATIC BATTERY CHARGER
  • DESIGN AND CONSTRUCTION OF AN ANTI-THEFT ALARM FOR VEHICLE
  • DESIGN AND CONSTRUCTION OF ANELECTRIC SHOCK GUN

DESIGN AND CONSTRUCTION OF AN

  • AUTOMATIC ROOM-LOCK AND LIGHT SYSTEM
  • DESIGN AND CONSTRUCTION OF A KEYPAD CONTROL FOR MULTIPLE APPLIANCES
  • DESIGN AND CONSTRUCTION OF A MEDICINE-TIME REMINDER
  • DESIGN AND CONSTRUCTION OF AN RJ45 CABLE TESTER
  • DESIGN AND CONSTRUCTION OF DIGITAL INCUBATOR
  • DESIGN AND CONSTRUCTION OF DIGITAL CALENDAR
  • HND ELECTRICAL ELECTRONICS ENGINEERING PROJECT TOPICS
  • OND ELECTRICAL ELECTRONICS ENGINEERING PROJECT TOPICS

MASTERS DEGREE ELECTRICAL/ELECTRONICS PROJECT TOPICS

FREE PROJECT TOPICS/MATERIAL FOR ELECTRICAL/ELECTRONICS

DOWNLOAD ELECTRICAL ELECTRONICS ENGINEERING FREE PROJECT

FREE PROJECT TOPICS/MATERIALS – BSC ELECTRICAL ELECTRONIC

  • DESIGN AND CONSTRUCTION OF A 6VOLTS BATTERY CHARGER
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC GATE
  • DESIGN AND CONSTRUCTIONOF A REMOTE CONTROL GATE FOR HOMES
  • DESIGN AND CONSTRUCTION OF A THREE PHASE SQUIRREL CAGE INDUCTOR MOTOR
  • DESIGN AND CONSTRUCTION OF SOLAR DRYER
  • DESIGN AND CONSTRUCTION OF AN ANALOGUE CAPACITANCE METER
  • DESIGN AND CONSTRUCTION OF A SOLAR CHARGER CONTROLLER
  • DESIGN AND CONSTRUCTION OF A SOLAR WATER HEATER
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC BATHROOM LIGHT
  • DESIGN AND CONSTRUCTION OF A STEP SWITCH SELECTOR
  • DESIGN AND CONSTRUCTION OF A 9-WAY CLAP ACTIVATED SWITCH
  • DESIGN AND CONSTRUCTION OF A CLAP ACTIVATED SWITCH USING TRANSISTORS
  • DESIGN AND CONSTRUCTION OF A SENSITIVE CLAP SWITCH
  • DESIGN AND CONSTRUCTION OF A CLAP ACTIVATED SWITCH USING 555 TIMERS
  • DESIGN AND CONSTRUCTION OF AN AC CONTINUITY TESTER
  • DESIGN AND CONSTRUCTION OF A CONTINUITY TESTER
  • DESIGN AND CONSTRUCTION OF A 220V/12V STEP DOWN TRANSFORMER
  • DESIGN AND CONSTRUCTION OF A SALT TASTER
  • DESIGN AND CONSTRUCTION OF AN ELECTRONICS LETTER BOX
  • DESIGN AND CONSTRUCTION OF AN FM WIRELESS MICROPHONE
  • DESIGN AND CONSTRUCTION OF A 6V RECHARGEABLE LANTERN
  • DESIGN AND CONSTRUCTION OF A HOUSE BELL WITH INDICATING LIGHT
  • DESIGN AND CONSTRUCTION OF A RADIO FREQUENCY GSM SIGNAL JAMMER
  • DESIGN AND CONSTRUCTION OF A USB MOBILE CHARGER
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC CHANGEOVER SWITCH
  • DESIGN AND CONSTRUCTION OF A HIGH AND LOW VOLTAGE CUT-OUT WITH DELAY AND ALARM
  • DESIGN AND CONSTRUCTION OF A HIGH AND LOW VOLTAGE CUT-OFF WITH TIME DELAY
  • DESIGN AND CONSTRUCTION OF A 500W POWER AMPLIFIER
  • DESIGN AND CONSTRUCTION OF A 60W AUDIO AMPLIFIER
  • DESIGN AND FABRICATION OF A LAWN MOWER
  • WATER RETICULATION INA WORKSHOP
  • CONSTRUCTION AND FABRICATION OF AN ICE-BLOCK MAKING MACHIINE
  • DESIGN AND FABRICATION OF DEEP FREEZER
  • DESIGN AND FABRICATION OF A MOBILE REFRIGERATOR
  • DESIGN AND FABRICATION OF A WOOD LATHE MACHINE
  • DESIGN AND CONSTRUCTION OF A COAL- FIRE POWER GENERATOR
  • REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION
  • DESIGN AND FABRICATION OF A DUST EXTRACTOR
  • FUEL CELLS ON AEROSPACE
  • ELECTRICAL DESIGN AND DRAFTING OF A STANDARD SWIMMING POOL
  • DESIGN AND CONSTRUCTION OF A FIRE DETECTORUSING MQ-2 SENSOR
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC FIRE ALARM USING MQ-2 SENSOR
  • DESIGN AND CONSTRUCTION OF A 6V CELL PHONE BATTERY CHARGER
  • DESIGN AND CONSTRUCT A THREE PHASE AUTO-TRANSFORMER OF RATING 2.5KVA, AND STEP DOWN VOLTAGE OF 415 AND
  • SECONDARY TAPS OF 0.,180V, 200V, 230V AND 240V
  • FAILURE ANALYSIS OF A POWER HACKSAW MACHINE
  • CONSTRUCTION CLASS CHAIR AND TABLE
  • DESIGN AND CONSTRUCTION OF A TRANSISTOR TESTER
  • DESIGN AND CONSTRUCTION OF AN AUTMATIC TRANSFER SWITCH
  • EFFICIENT USE OF LIGHTEMITTING DIODE
  • DESIGN AND CONSTRUCTION OF A 12 VOLTS AUTHOMATIC BATTERY CHARGER WITH CHARGING PROGRESS AND CHARGING LEVEL INDICATOR
  • ASSEMBLING OF A 5KVA AUTOMATIC VOLTAGE STABILIZER
  • DESIGN AND CONSTRUCTION OF BURGLAR ALARM SYSTEM
  • DESIGN AND CONSTRUCTION OF GSM BASED HOME SECURITY SYSTEM
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC METER READING DEVICE
  • DESIGN AND CONSTRUCTION OF FINGERPRINT BASED SECURITY SYSTEM
  • WIRELESS PATIENT HEARTBEAT AND TEMPERATURE MONITORING SYSTEM
  • THE DESIGN AND CONSTRUCTION OF A 220 / 12 VOLTS SINGLE PHASE STEP-DOWN TRANSFORMER
  • THE DESIGN AND CONSTRUCTION OF A 40 WATT HI-FI AMPLIFIER
  • DESIGN AND CONSTRUCTION OF A 3 WAY INTER-COMMUNICATION SYSTEM
  • THE DESIGN AND CONSTRUCTION OF A THREE PHASE AUTOMATIC PHASE SELECTOR
  • THE CONSTRUCTION OF A BATTERY CHANGER USING SILICONCONTROLLED REGULATOR (SCR)
  • THECONSTRUCTION OF A 12 VOLT LEAD ACID BATTERY CHARGER
  • THE CONSTRUCTION OF AN AUTOMATIC CHANGE OVER SWITCH
  • THE CONSTRUCTION OF C.D SPEAKER DOUBLE MAGNET OF SIX AND HALF INCHES DIAMETER 150 WATTS 18 IMPEDANCE
  • THE DESIGN AND CONSTRUCTION OF A MULTIPURPOSE SECURITY SYSTEM WITH ALARM AND DISPLAY
  • THE DESIGN AND CONSTRUCTION OF A MULTIPURPOSE SECURITY SYSTEM
  • THE DESIGN AND CONSTRUCTION OF A D.C TO A.C INVERTER SYSTEM
  • THE DESIGN AND CONSTRUCTION OF BATTERY CHARGER
  • THE CONSTRUCTION OF TWO FEET ELECTRONICS FLUORESCENT LAMP
  • THE DESIGN AND CONSTRUCTION OF A DC TO AC POWER INVERTER INCORPORATED WITH AN AUTOMATIC SWITCH OVER BATTERY CHARGER
  • THE DESIGN AND CONSTRUCTION OF AUTOMATIC FENCE LIGHT CONTROLLER
  • THE DESIGN AND CONSTRUCTION OF HOUSE BELL WITH INDICATING LIGHT
  • DESIGN AND CONSTRUCTION OF A 60W AUDIO AMPLIFIER
  • DESIGN AND CONSTRUCTION OF A PORTABLE KEROSENE PRESSURE-COOKER
  • DESIGN AND FABRICATION OF APRIMUS STOVE
  • DESIGN AND CONSTRUCTION OF A COMMON RAIL DIRECT INJECTION (CRD)
  • DESIGN AND FABRICATION OF GRAIN GRINDING MACHINE
  • DESIGN AND CONSTRUCTION OF AN ANTI-LOCK BRAKING SYSTEM (ABS)
  • DESIGN AND FABRICATION OF DRILLING MACHINE
  • DESIGN AND CONSTRUCTION OF FLOW NOZZLE
  • DESIGN AND FABRICATION OF A HEAT EXCHANGER
  • DESIGN AND CONSTRUCTION HOT STAMPING MACHINE
  • DESIGN AND FABRICATION OF A TURBOCHARGER
  • DESIGN AND CONSTRUTION WINDSHIELD WASHER
  • DESIGN AND FABRICATION OF GRAIN GRINDING MACHINE
  • DESIGN AND CONSTRUCTION OF A DRAWING BOARD
  • DESIGN AND FABRICATION OF A HAIR DRYER
  • DESIGN AND FABRICATION OF POPCORN MAKING MACHINE
  • DESIGN OF A WASHING MACHINE
  • DESIGN AND CONSTRUCTION OF A SOLAR OPERATED AUTOMATIC STREET LIGHT CONTROL SYSTEM
  • DESIGN AND CONSTRUCTION OF A SOLAR STREET LIGHT
  • DESIGN AND IMPLIMENTATION OF INTERCOM
  • DESIGN AND CONSTRUCTION AN AUTOMATIC VOLTAGE STABILIZER USING MICROCONTROLLER
  • AUTOMATIC WATER LEVEL CONTROLLER WITH WATER HEATER COMPARTMENT
  • DESIGN AND IMPLIMENTATION OF SOLAR/PC POWERED SMOKE DETECTOR
  • DESIGN AND CONSTRUCTION OF AN ENERGY CONSUMPTION INDICATOR
  • DESIGN AND FABRICATION OF A CORN SHELLER
  • DESIGN AND CONSTRUCTION OF A LAN CABLE TESTER
  • DESIGN AND FABRICATION OFA THRESHING MACHINE
  • REPAIR AND REHABILITATION OF A FAULTY AIR CONDITION
  • DESIGN AND CONSTRUCTION OF DOOR LOCKING SECURITY SYSTEM USING GSM
  • REMOTE CONTROL DISH ANTENNA TRACKING SYSTEM
  • DESIGN AND CONSTRUCTION OF AN ELECTRONIC TOSS CIRCUIT
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC DOOR BELL WITH OBJECT DETECTION
  • DESIGN AND CONSTRUCTION OF A SPEECH AMPLIFIER
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC LOAD CONTROLLER AND SHARING SYSTEM
  • DESIGN OF A VENDING MACHINE
  • DESIGN AND CONSTRUCTION OF A FREQUENCY COUNTER
  • DESIGN OF AN ENVIRONMENT MONITORING SYSTEM
  • AUTOMATIC LIGHT DIM DEEP CONTROLLER
  • DESIGN OF A FRICTIONLESS ELECTROMAGNETIC BRAKING SYSTEM
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC STREET LIGHT CONTROLLER
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC STREET LIGHT USING LDR AND RELAY
  • DESIGN AND CONSTRUCTION OF MULTIPLE LATHE TOOL POST
  • BANDWIDTH REQUIREMENT FOR COMMUNICATION AT UNI-AGRIC
  • TEMPORAL TEMPERATURE WARMING AND SETIMATION OF DIUNEL VARIABILITY FOR ENVIRONMENTAL AND EXOTIC HEALTH EFFECT
  • DESIGN AND CONSTRUCTION OF A MICROCONTROLLER BASED WINDING MACHINE
  • DESIGN OF AN ACCIDENT ALERT IN MODERN TRAFFIC SYSTEM WITH CAMERA
  • DESIGN AND IMPLIMENTATION COURSE REGISTRATION AND EXAMINATIONVALIDATION USING

FINGERPRINT TECHNOLOGY

  • DESIGN AND FABRICATION OF A CORN SHELLER
  • ENVIRONMENTAL IMPACT ASSESSMENT ON HIGH WAY HAZARDS
  • FINE TUNING LOCAL AREA NETWORK AND DEPLOYING A MAILING SYSTEM USING MICROSOFT OUTLOOK

ASSESSMENT OF POWER SYSTEM RELIABILITY

  • DESIGN AND CONSTRUCTION OF A REMOTE CONTROL DISH ANTENNA TRACKING SYSTEM
  • PRODUCTION OF BLACK AND BROWN POLISH
  • DESIGN AND CONSTRUCTION OF A PURE SINE WAVE INVERTER SYSTEM
  • DESIGN AND CONSTRUCTION OF A ELECTRONIC TOSS
  • DESIGN AND CONSTRUCTION OF A DARK DETECTOR
  • DESIGN AND CONSTRUCTION OF A CONTROLLING OF TRANSFORMER FROM SUBSTATION
  • DESIGN AND CONSTRUCTION OF A BUS INFORMATION ALERT USING ZIGBEE
  • DESIGN AND CONSTRUCTION OF ABIOMETRIC AUTENTICATION SYSTEM
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC SPEED CONTROLLER IN SCHOOLS AND COLLEDGES
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC LOAD CONTROLLER AND SHARING SYSTEM
  • DESIGN AND CONSTRUCTION OF AN ATM TERMINAL DESIGN BASED ON FINGER PRINT RECOGNITION
  • DESIGN AND CONSTRUCTION OF A BI-DIRECTIONAL VISITORS COUNTER
  • DESIGN & CONSTRUCTION OF NUMERIC CONTROLLED DOOR LOCKING SYSTEM
  • DESIGN AND CONSTRUCTION OF A TIME LOCK
  • DESIGN AND CONSTRUCTION OF AN ELECTRONIC LOCK
  • DESIGN AND CONSTRUCTION OF A CORDLESS POWER CONTROLLER (CPC)
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC LIGHT DIM DEEP CONTROLLER
  • DESIGN AND CONSTRUCTION OF A E-CASH PAY OFF FUEL STATION
  • DESIGN OF A MEDICAL MONITORING SYSTEM
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC PLANT IRRIGATION SYSYTEM
  • DESIGN AND CONSTRUCTION OF AN AUTOMATIC CONVEYOR FOR INDUSTRIAL AUTOMATION
  • DESIGN AND CONSTRUCTION OF AN ATTENDANCE MANAGEMENT USINNNG FACE RECOGNITION SYSTEM
  • DESIGN AND CONSTRUCTION OF AN ACCIDENT ALERT IN MODERN TRAFFIC SYSTEM WITH CAMERA
  • DESIGNING A RF GSM MOBILE JAMMER
  • DESIGN AND CONSTRUCTION OF A TIMER BASED CODE LOCK
  • CONSTRUCTION AND DESIGN OF A 6V RECHARGEABLE LAM
  • DESIGN OF A DIGITAL TACHOMETER
  • DESIGN OF A TACHOMETE
  • DESIGN AND CONSTRUCTION OF AN RFID BASED SECURITY SYSTEM
  • DESIGN AND CONSTRUCTION OF AN OPTIMUM ENERGY MANAGEMENT SYSTEM
  • DESIGN AND CONSTRUCTION OF A PROXIMITY SENSOR
  • DESIGN AND CONSTRUCTION OF A PIR SENSOR BASED SECURITY SYSTE
  • DESIGN AND CONSTRUCTION OF A SINGLE PHASE AUTO-TRANSFORMER OF RATING IKVA, 240V/110, 80 12V, 6V
  • DESIGN AND CONSTRUCTION OF A MAGNETIC PROXIMITY SWITCH
  • DISCUSS THE PROCEDURES OF HOUSE WIRING, AND USES OF FUSE AND SWITCHES
  • CONSTRUCTION OF PVS CONDUIT WIRING SYSTEM OF TWO BEDROOM BUNGALOW
  • DESIGN AND CONSTRUCTION OF A GSM MODEM/PHONE MONITOR AND CONTROL ELECTRICAL DEVICES
  • DESIGN AND CONSTRUCTION OF A GSM BASED AUTOMATIC ENERGY METER READING SYSTEM
  • DESIGN OF GPS DATA LOGGER INTO MMC/SD MEMORY CAR
  • DESIGN AND FABRICATION OF FRICTIONLESS ELECTROMAGNETIC BRAKING SYSTEM (FOR MECH ENGINE)
  • DESIGN OF AN INTELLIGENT TRAFFIC CONTROL SYST M
  • DESIGN AND CONSTRUCTION OF A ENERGY CONSUMPTION INDICATO
  • DESIGN AND CONSTRUCTION OF A BREAK FAILURE INDICATOR FOR FOUR WHEELS
  • DESIGN AND CONSTRUCTION OF A GSM-BASED WIRELESS HOME APPLIANCES
  • DESIGN AND CONSTRUCTION OF A 3-PHASE IRRIGATION WATER PUMP CONTROLLER F USING DUAL GSM MODEMS
  • DESIGN AND CONSTRUCTION OF BATTERY LEVEL INDICATOR
  • DESIGN AND CONSTRUCTION OF DEAD MAN’S SWITCH
  • EXPLOSIVE DETECTION SYSTEM
  • DESIGN AND CONSTRUCTION OF A PASSWORD BASED CIRCUIT BREAKER
  • DESIGN AND CONSTRUCTION OF A HUMAN DETECTION ROBOT
  • DESIGN AND CONSTRUCTION OF A PROGRAMMABLE THERMOSTAT
  • DESIGN AND CONSTRUCTION OF A MEDICAL ALARM

MORE TOPICS:

  1. DESIGN AND CONSTRUCTION OF A PYRAMID-SHAPED SOLAR
  2. THE DETERMINETION OF THE RELATIONSHIP BETWEEN THE WEIGHT AND AGE OF MALE AND FEMALE STUDENTS IN DELTA STATE UNIVERSITY, ABRAKA
  3. THE DESIGN, CONSTRUCTION AND TEST ON A TWO STATION SIMPLE INTERCOM SYSTEM
  4. A GEOPHYSICAL INVESTIGATION USING SEISMIC REFRACTION METHOD TO DETERMINE THE CAUSES OF ROAD FAILURE, A CASE STUDY OF IRUEKPEN-OZALLA ROAD AXIS
  5. A STUDY INTO ENERGY GAP IN SUPER CONDUCTORS
  6. DESIGN AND CONSTRUCTION OF A MONITORING SYSTEM THAT MEASUREE LIGHT INTENSITY AND GAS LEVEL
  7. DESIGN AND CONSTRUCTION OF OCEAN SURFACE AND SUBSURFACE CURRENT SIMULATOR
  8. DESIGN AND IMPLEMENTATION OF A QUERY OPTIMIZER
  9. RADIOACTIVITY CONCENTRATION OF SOME STAPLE FOOD CONSUMED IN UVWIE AND WARRI SOUTH LOCAL GOVERNMENT AND EFFECT ON HUMAN AFTER CONSUMPTION

HOW TO RECEIVE PROJECT MATERIAL(S)

After paying the appropriate amount (#5,000) into our bank Account below, send the following information to

08068231953 or 08168759420

(1)    Your project topics

(2)     Email Address

(3)     Payment Name

(4)    Teller Number

We will send your material(s) after we receive bank alert

BANK ACCOUNTS

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 0046579864

Bank: GTBank.

OR

Account Name: AMUTAH DANIEL CHUKWUDI

Account Number: 3139283609

Bank: FIRST BANK

FOR MORE INFORMATION, CALL:

08068231953 or 08168759420

AFFILIATE LINKS:

myeasyproject.com.ng

easyprojectmaterials.com

easyprojectmaterials.net.ng

easyprojectsmaterials.net.ng

easyprojectsmaterial.net.ng

easyprojectmaterial.net.ng

projectmaterials.com.ng

googleprojectsng.blogspot.com

myprojectsng.blogspot.com.ng

https://projectmaterialsng.blogspot.com.ng/
https://foreasyprojectmaterials.blogspot.com.ng/
https://mypostumes.blogspot.com.ng/
https://myeasymaterials.blogspot.com.ng/
https://eazyprojectsmaterial.blogspot.com.ng/
https://easzprojectmaterial.blogspot.com.ng/

By admin

Leave a Reply

Your email address will not be published. Required fields are marked *