MASTERS METALLURGICAL ENGINEERING PROJECT TOPICS AND MATERIALS

MASTERS METALLURGICAL ENGINEERING PROJECT TOPICS AND MATERIALS

ATTENTION:

BEFORE YOU READ THE PROJECT TOPICS BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!

NOTE:

WE WILL SEND YOU THE ABSTRACT, TABLE OF CONTENT AND CHAPTER ONE OF YOUR APPROVED TOPIC FOR FREE.

CHOOSE FROM THE LIST OF TOPICS BELOW. SEND YOUR EMAIL ADDRESS AND THE APPROVED PROJECT TOPIC TO ANY OF THESE NUMBERS-08068231953, 08168759420

WE WILL THEN SEND THE ABSTRACT, TABLE OF CONTENT AND CHAPTER ONE FOR FREE

NOTE ALSO:

WE CAN ALSO DEVELOP THE FULL PROJECT WORK

CALL: 08068231953, 08168759420

MASTERS METALLURGICAL ENGINEERING PROJECT TOPICS AND MATERIALS

Use of local clays for the production of porcelain pin insulators
The effect of particle size and particle size distribution on the modulus of rupture of some nigerian clays
Study of the properties of some local clays for the production of floor tiles
Inhibition of the corrosion of mild steel in acidic environment using azadirachta indica (neem) leaf extract as inhibitor
Factors affecting the colour yield of an acid dye on nylon fabric
Effect of cooling rate and modification on the microstructure and tensile properties of al-si-mg alloy
Bacteria corrosion of mild and medium carbon steels
Design, construction and testingof a crucible furnace
Design, construction and testing of a crucible furnace
Characterization of the mechanical proper ties of unsaturated polyester reinforced with varying fraction of particulate groundnut shell
Mechanical and microstructural characterization of aluminium metal matrix composite reinforced with particulate periwinkle shells
Effect of heat treatment on corrosion of mild steel weld metal in cassava juice ~
Thermomechanical processing and constitutive strength of hot rolled mild steel
The effect of particle size and particle size distribution on the modulus of rupture of some nigerian clays
Study of the properties of some local clays for the production of floor tiles
Carbide precipitate deactivation and nodule characteristics in thin wall ductile iron (twdi) castings
Inhibition of the corrosion of mild steel in acidic environment using azadirachta indica (neem) leaf extract as inhibitor
Modelling of sintering behaviour of a1-49.6 power compact
Effect of some process variables on nickel electroplating of low carbon steel
Preparation and characterization of doped transparent zinc oxide thin films for solar cell applications
Corrosion behaviour of low carbon steel used in oil and gas aboveground storage tanks
Assessment of iron ore mining gangues in itakpe for secondaryrecovery of other metal values
Pressure-assisted fabrication of organic light emitting devices
Induced sickling of erythrocytes via bending and the effect of mechanical properties on cell pore entry
Substitutional and vacancy defects in two-dimensional alsb: a first principle approach
Investigation of peo-polymer blend electrolytes for electrochemical capacitors
Controlled release of fungicidal antimicrobials on packaged foods
Modeling of cold welding and lamination of organic and hybrid organic /inorganic structures
Cell surface interaction on a multi – scale
Biodegradation and recycling of polyethylene into composite building materials
Use of local clays for the production of porcelain pin insulators
Morphology analysis of lead iodide- and lead acetatebased perovskite layers for solar cell application
Effect of cooling rate and modification on the microstructure and tensile properties of al-si-mg alloy
Optical and electrical characterisation of p3ht:pcbm organic photovoltaic devices
Assessment of barite deposit in nassarawa state for oil drilling application
Investigation of lead-free bismuth perovskite by numerical simulation using scaps.
Fabrication of biodegradable implantable devices for sustained localized drug release
Design and testing of mycelium biocomposite
Numerical modeling of wellbore instability (tensile failure) using fracture mechanics approach
Corrosion behavior of epoxy (sigmaline) coated x65 steel in some selected corrosive media
Synthesis and characterization of extruded alkali activated earth-based composites for sustainable building construction
Layered composite thin films for cost effective transparent organic solar cell electrodes
Technical assessment of mining site and barite quality in nigeria
Clay ceramic materials for water filtration: properties, processing and performance
Improving the wear resistance of barite mining tools
Oxidation of tbc coated nickel based superalloys and gamma titanium aluminides for land-based engines
Annealing heat treatment of organic material for controlled bulk heterojunction solar cells
Effect of prodigiosin on breast cancer cell viability
Implantable biomedical devices for localized breast cancer drug delivery
Implantable biomems devices for localized breast cancer drug-delivery
Clay filtration of microbes and fluoride
Environmental effect of iron ore mining operations in itakpe, kogi state
Sweet corrosion inhibition of carbon steel using a blend of palm-jatropha leaf extract in 3.5% nacl solution
First-principles density functional theory studies of the structural and electronic properties of prodigiosin as a cancer drug
Fracture toughness and resistance-curve behaviour of laminated bamboo
Bacterial remediation of polyethylene
Effect of sintering time on mechanical properties of porous ti-6al-4v implant
First principles study of porous carbon as anode material for metal-ion (na, li, mg) batteries applications
Performance of a nigerian metakaolin-based geopolymer as a sustainable building material
Carbon soot as a potential and sustainable source of porous nanostructure for energy storage
Structural and mechanical properties of termite soil as a partial replacement to cement
Abrasive wear studies of pack cyanided mild steel (pcms)
Investigation of stress corrosion cracking of storage tanks used to store methanol for gas hydrate inhibition
Activated carbon from plant-biomass waste materials as promising electrodes for supercapacitor applications
Prodigiosin encapsulated poly lactide-co-glycolide (plga)- coated stent for coronary cardiovascular interventions
Failure mechanisms of epoxy coatings in pipelines
Strength and fracture of earth-based and natural fiber-reinforced composites
Design, construction and evaluation of charcoal, activated carbon, moringa seed and sand water filtration systems
Effects of bending and stretching on hybrid organic- inorganic trihalide perovskite solar cells
Assessment of heavy metal pollution in soil and surface water in mng-gold, kokoya district, bong county, liberia
Adhesion and optoelectronic properties of organic light emitting devices (oleds) and hybrid organic-inorganic light emitting devices (hoileds) with tio2 nano-particles
Implantable composite devices for the localized treatment of breast cancer
A study of the pre-treatment temperature of lignocellulosic butanol as an alternative fuel (biofuel) produced from bamboo using clostridium acetobutylicum
Utilisation of rice husk ash (rha) in the production of magnesium oxide (mgo)-based cement
Effects of prodigiosin on breast cancer cell viability
Numerical modeling of wellbore instability (shear failure) using fracture mechanics approach
Mechanical properties of natural fiber-reinforced earth-based composites
The role of potassium sorbate in multi-layer chitosan-based on aspergillus niger
Biosynthesis of magnetic nanoparticles for cancer detection and treatment
Nano- and micro-particles for breast cancer detection and treatment
Phytoremediation of crude oil contaminated soil using cowpea and indole-3-acetic acid as a growth hormone
Characterization and stabilization of laterite for sustainable construction applications
The effect of bitumen coatings on the corrosion of low carbon steels (api 5l x65)
Adsorption of dissolved ions in mine wastewater with laterite and iron oxide nanoparticles
Design, construction and performance evaluation of a solar drying system for crops
Fracture mechanics approach for the maintenance of offshore oil and gas pipeline
Effect of annealing temperature on the formation of methylammonium tin tri-iodide perovskite thin film
Investigation of cement mortar and steel used in reinforced concrete in nigeria
The role of sulfur oxidizing bacteria on corrosion of x65 low carbon steels and its mitigation using sodium tungstate and nickel biocides
The impact of low density polyethylene (water sachets) on the mechanical property of cement mortar
Bacteria corrosion of mild and medium carbon steels
Potentials of polylactide- chitin composites as femoral scaffold in orthopaedics
Fabrication and characterization of biodegradable polymer composites for packaging applications
Synthesis and application of pure and modified tio2 for photocatalycic remediation of fractionated crude oil.
Effect of pressure on the performance of organic light emitting devices fabricated by cold welding
Paclitaxel loaded polylactide-co-glycolide acids for coronary artery disease and cancer treatment
Bioactive polymer as an alternative binder for electrochemical capacitors
Co2 corrosion of the welded joint of an x65 steel: analysis of surface film formed
Modeling and simulation of stress distribution and crack configuration of the geometry of ceramic water filter
Effect of thermomechanical working on the strengthening of some austenitic steel grades
Working properties of some selected refractory clay deposits in south western nigeria
A study of processing parameters on the carburization of c2r steels
The role of forging during inertia friction welding of nickel base super alloy rr1000
The effects of a5tb refiner on the fatigue strength of 6063al alloy
Photocatalytic degradtion of azo and rhodamine dyes using nanostructured copper (ii) oxide
Tmaz microcracking in inertia friction welding of pm rr1000 superalloy: concomitant effect of constitutional liquating particles
Effect of degree of deformation on the mechanical properties of high temperature thermomechanically treated steel
Effect of heat treatment on the damage ratio of corroded st 60. Mn steel
Adaptation of ushafa clay, abuja, as a suitable replacement for bentonite in the foundry industry
Microstructural study of heat treated chromium alloyed grey cast iron
Effect of cement particle size on the compressive strength and other physiochemical properties of portland cement
Effect of paramagnetism on the corrosion abatement of mild steel
Effect of electrode types on the solidification cracking susceptibility of austenitic stainless steel weldment
Inhibition of the corrosion of mild steel in acidic environment using azadirachta indica (neem) leaf extract as inhibitor