ATTENTION:
BEFORE YOU READ THE ABSTRACT OR CHAPTER ONE OF THE PROJECT TOPIC BELOW, PLEASE READ THE INFORMATION BELOW.THANK YOU!
INFORMATION:
YOU CAN GET THE COMPLETE PROJECT OF THE TOPIC BELOW. THE FULL PROJECT COSTS N5,000 ONLY. THE FULL INFORMATION ON HOW TO PAY AND GET THE COMPLETE PROJECT IS AT THE BOTTOM OF THIS PAGE. OR YOU CAN CALL: 08068231953, 08168759420
WHATSAPP US ON 08137701720
PRACTICAL KNOWLEDGE ON THE REHABILITATION PROCESS OF A ROTARY SLASHER
CHAPTER ONE
1.0 INTRODUCTION
Rotary Slashers is an agricultural machine, which is used for cutting unwanted grass. These rotary slashers are joined through jigs, fixtures & dies, thus ensure joining accuracy as well as interchangeability. It has heavy duty gear boxes and rugged frame which can withstand rough and tough wild grass, anchored straw and bushes. It is designed for fast application to any type of 5080 HP tractor with three point linkage. (www.indianagrovision.com, 2018).
Rotary slasher are generally have an opening by the side of the housing through which cut grasses expelled. The blade is seldom Sharp enough to give a neat cutting point.The blade simply cut the grass resulting in brown tips.However the horizontal blades are easy to removed and sharpen or replace. Base on the energy source , the tractor power take off shaft is use to transfer power to the implement.(www.ijeter.everscience.org, 2018).
1.1 BACKGROUND OF THE STUDY
This project deals with the rejuvenation of rotary slasher slasher which was broken down for a while in the workshop due to some mechanical fault. We aimed at restoring the rotary slasher to good operative,effective and also make it to serve the purpose.
Rehabilitation of rotary slasher means to the process involved in repairing and rejuvenation of a broken down rotary slasher in other to restore it back to normal working condition. Due to high global economic set back today, a lot of people find it difficult when it comes in term of rehabilitation of broken down machine, implement part or the machine as a whole and hence serve as an alternative to purchasing new one.
1.2 STATEMENT OF PROBLEM
A physical inspection was carried out on the scrapped and abandoned rotary slasher to access the problems of the implement. After inspection and diagnosed. It was discovered that the following faults were detected.
i. The oil seal was damaged
ii. The slip clutch safety guard was missing
iii. The blades is blunt, require resharpening
iv. The center hitch pin was missing
v. The bolts and nuts on the blade need replacement
1.3 AIM AND OBJECTIVE
1.3.1 AIM
i. The aim of this project is to acquire practical knowledge on the rehabilitation process of a rotary slasher
ii. To make the implement functional
iii. To highlight on the advantages of good maintenance culture
1.3.2 OBJECTIVE
i. To inspect the implement
ii. To diagnose and detect the fauts in the rotary slasher
iii. To estimate the requirements for the rehabilitation
iv. To rehabilitate and test implement
v. To provide additional implement to the department.
1.4 SIGNIFICANCE OF THE STUDY
Is to have practical knowledge and experience of what is been thought in the classroom and also have idieas on the maintenance to add to the number of good equipment in the department.
This project would not only help in the rehabilitating the rotary slasher, but will help in correcting the maintenance of the implement, broadens the students technical knowledge of the implement hereby increasing their interest the field.
1.5 SCOPE OF THE STUDY
The scope of this project is the precurment, purchase and replacement of the defectives parts in the rotary slasher and to extend the functionality of the implement in the department.
1.6.1 DEFINITION OF TERMS
i. MACHINERY
This is a group of powerful multipurpose engine powered machines or device on which implement are mounted or attached for their operations. This device require skills to operate, example tractors, bulldozer, milking machine, etc.They are often heavy duty machines adopted for large scale mechanized farming.
ii. EQUIPMENT
These are lower machines or advanced implements that require both skilled and unskilled labour for their operation.They range from simple hand held apparatus to complex ones designed a specific work.
iii. IMPLEMENT
These are higher and larger tools or devices that are attached to or mounted on animals or machines used in farming operation. Without the aid of these machines or animals,implements cannot function on there own.They are made up of material especially iron for a specific purpose in the farming operation.example ,ploughs, shearing blade,harrow, Rodgers,cultivators, tiller.etc that are attached to the tractor use in mechanized farming
1.6.2 CLASSIFICATION OF IMPLEMENT
Agricultural implement can be further classified according to how the drive power from the power unite the can be further classified into four major unit namely.
i. FULLY MOUNTED IMPLEMENT
Fully mounted implement are machines that drive all power required for work from the prime mover,such machine is mounted is mounted on the tractor’s three point linkage and can be lowered or lifted using a tractor hydraulics system. Example of fully mounted implement include rotary slasher,plough, subsoiler, disc harrow etc.
ii. SEMI-MOUNTED IMPLEMENT
These is an implement that is partially supported by the tractor and partially supported by own wheel.such implement has only one pair of wheel, usually at the back while the front is supported by the tractor draw bar.example of such implement includes planter,sprayers,and fertilizer drills
iii. TRAIL IMPLEMENT
These are implement that is attached to the tractor through the draw bar which provide a towing or pull force but can not support the weight of the implement .such implement include tractor trailer use for transportation.
iv. SELF PROPELLED IMPLEMENT
This is a machine this is self propelled and has his own engine and tyre for support. It does not depend on the tractor for power and support.
HOW TO RECEIVE PROJECT MATERIAL(S)
After paying the appropriate amount (#5,000) into our bank Account below, send the following information to
08068231953 or 08168759420
(1) Your project topics
(2) Email Address
(3) Payment Name
(4) Teller Number
We will send your material(s) after we receive bank alert
BANK ACCOUNTS
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 0046579864
Bank: GTBank.
OR
Account Name: AMUTAH DANIEL CHUKWUDI
Account Number: 3139283609
Bank: FIRST BANK
FOR MORE INFORMATION, CALL:
08068231953 or 08168759420
http://graduateprojects.com.ng/